Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

Catalyst shows off a waterproof Apple Watch case at IFA

Susie Ochs | Sept. 4, 2015
But is this even needed, since tests have shown the Apple Watch performing better than its waterproof rating even without a case?

catalyst watch primary

Catalyst began taking preorders for its waterproof Apple Watch case in August, but our colleagues at the IFA Consumer Electronics Fair in Berlin just got to see one in person. It’s not the most attractive, since it fully covers the watch’s sides, including the button and the digital crown, and totally replaces the Apple Watch’s strap. Since the case covers the attachment points for compatible Apple Watch straps, you’ll have to use the included nylon strap instead. So far Catalyst is only offering the case for 42mm watches, with a preorder price of $60.

While the sides of your Apple Watch are totally covered, the back is left open so you can still charge the Apple Watch without removing the case, and the heart rate sensor should still work. The screen is left uncovered too.

catalyst watch back 
The Catalyst case leaves the touchscreen uncovered, as well as the back, so you can still charge your watch or use the heart rate sensor without removing the case. Credit: Catalyst

That means your Apple Watch will remain fully functional while it’s being protected from water and dust, but capacative touchscreens don’t actually work when submerged in water, and in swimming tests done with an uncased Apple Watch, triathelete Ray Maker found that the watch’s heart rate data wasn’t the most accurate during a swimming workout either.

Catalyst says its case has a waterproof rating of IP68, which according to this chart, should protect completely against dust, as well as against water when immersed beyond 1 meter. Reps for Catalyst told our colleagues at IFA that the case would stay waterproof to at least 5 meters for 30 minutes, and that they weren’t sure how deep it could go.

All wet

But do you even need a waterproof case for your Apple Watch? Out of the box, its waterproof rating is IPX7, which means it should “withstand incidental exposure to water of up to 1 meter for up to 30 minutes.” That is generally understood to mean you can wash your hands, get caught in a rain shower, even shower with your Apple Watch and it’ll probably be fine. Swimming isn’t recommended by Apple—but people have worn it swimming with no ill effect.

Ray Maker’s tests, mentioned above, included swimming laps in a pool, jumping off diving platforms, and even using a waterproof testing chamber to automate a test to 40 meters—and the Apple Watch Sport survived it all. Craig Hockenberry thoroughly tested his Apple Watch Sport when swimming in pools and the ocean, and his watch wasn’t damaged, but he ran into the same issues starting and stopping workouts since the touchscreen and Force Touch don’t work in the water. (He also recommends rinsing the watch with clean water after every swim, to avoid corrosion of the plastic gaskets that seal up the watch’s button and Digital Crown.)

 

1  2  Next Page 

Sign up for CIO Asia eNewsletters.