Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

MIT electric car may rival gas models on performance

Nick Barber | July 23, 2009
The school's Electric Vehicle team hopes to build an electric car that can recharge in 11 minutes

MIT Electric Vehicle Team

CAMBRIDGE, MASSACHUSETTS, 22 JULY 2009 - Inside a plain-looking garage on the Massachusetts Institute of Technology's campus, undergraduate Radu Gogoana and his team of fellow students are working on a project that could rival what major automobile manufacturers are doing.

The team's goal is to build an all-electric car with similar performance capabilities of gasoline-only counterparts, which includes a top speed of about 161 kph, a family sedan capacity, a range of about 320 kilometers and the ability to recharge in about 10 minutes. They hope to complete the project, which they chronicle on their blog, by the third quarter of 2010.

Each member of MIT's Electric Vehicle Team works almost 100 hours a week on the project they call elEVen. "Right now the thing that differentiates us is that we're exploring rapid recharge," Gogoana said during an interview. He said that many of today's electric vehicles take between two to 12 hours to recharge and he doesn't know of any commercially available, rapidly recharging vehicles.

For this project, which is based on the body of a 2010 Mercury Milan Hybrid, the team plans to use lithium iron-phosphate cell batteries from A123Systems "because they have very low internal resistance and they've also been on the market for about three years," Gogoana said. The team's press materials added that, "electrochemistry [of the batteries] is less volatile than that of other types of lithium-ion cells, which makes these batteries desirable in applications where crash safety is a high priority."

The car's motor is an oil-cooled, three-phase AC induction motor from SatCon that weighs 138 kilograms including its controller. It was originally designed to be used in a 15,000 kg electric bus. So when it's installed in the 2,000 kg car, it should allow it to go from zero to 60 in under nine seconds and achieve a top speed of 100 mph at 12,000 RPMs.

In order to power the car's 250 horsepower, 187 kilowatt electric motor and give it similar performance to a gasoline engine, the team needs to wire a battery pack that includes 7,905 of the A123 cells. In order to rapidly recharge those batteries, they'll need 350 kilowatts. "That's enough power to blow the fuses on 20 residential homes at once ... so we'll be hooking up directly to MIT's power plant to get that kind of power," Gogoana said.

Obviously, not every home owner would have access to a power plant to charge their car, but Gogoana said the car could be charged overnight using a standard outlet. He hopes that once electric vehicles catch on and more charging stations are built, it will be "just as easy as filling your gas tank."

 

1  2  Next Page 

Sign up for CIO Asia eNewsletters.