Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

HP begins selling Jet Fusion 3D printer; says it's is 50% cheaper, 10X faster than others

Lucas Mearian | May 17, 2016
HP’s Jet Fusion technology could revolutionize manufacturing by increasing the speed of parts manufacturing

While technically dissimilar in some ways to binder jet or selective laser sintering (SLS), a method of binding pulverized material together with either chemicals or laser light, HP's Jet Fusion 3D does result in a similar post-processing requirements; printed parts must be allowed to cool and then be pulled from a bin or "cake" of powder and cleaned before used.

Joe Kempton, an analyst for market research firm Canalys, said HP's Multi Jet Fusion technology is essentially powder bed fusion 3D printing.

HP Fusion Jet 3D printer
HP

In addition to thermoplastics, HP will offer other materials with which to print, including ceramics.

HP says its Jet Fusion 3D printer is 50% cheaper, 10X faster than others

Hewlett-Packard today began taking orders for its first 3D printer, the HP Jet Fusion printer, which it said will be up to 10 times faster than existing machines and can cut the cost of manufacturing parts in half.

At the Rapid 3D additive manufacturing conference in Orlando, Fla., HP revealed two models:  the lower-cost and lower production 3200 series and the 4200 series, for which it is now taking orders. The 4200 series will begin shipping to manufacturers in October; the 3200 series will be available in mid-2017.

HP originally unveiled its Jet Fusion printer in October 2014.

HP 4200 Jet Fusion printer

HPs 4200 series Jet Fusion printer (left) and post processing station.

HP claims its printer will enable mass production of parts through additive manufacturing (3D printing), instead of just Rapid prototyping, for which the technology  is typically used. The printers are unlikely to be used to produce millions or billions of production parts; think, instead, in terms of hundreds, thousands or tens of thousands of parts, HP said.

The printers will also revolutionize 3D printing in that they will be able to print electronics in the parts they create through the use of conductive materials  printed at the voxel level. Like a pixel in a display, a voxel in 3D printing is a tiny cube, millions of which make up a larger object. A single voxel is 50 microns in size.

HP's Jet Fusion printers have a print area or a print bin of 16-inch x 12-inch x 16-inch Within that area, there are 2.4 teravoxels (a teravoxel is a trillion voxels).

"So parts are fused together at a very small level -- almost at the molecular level, and that helps give them a spectacular strength," said Alex Monino, HP 3D printing marketing director. "Imagine the possibilities of this in world of the Internet of Things, where not only every product is connected but every part in every product connected."

 

Previous Page  1  2  3  4  5  Next Page 

Sign up for CIO Asia eNewsletters.