Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

Gear We Love: Twelve South HiRise holds your display, hides your gear

Dan Frakes | Sept. 3, 2014
If you're looking for a way to raise your iMac or Apple Display to a more-ergonomic height, the HiRise for iMac does just that while giving you some extra gadget-hiding space.

twelve south hirise imac front 580

There's a lot of gear out there for your Apple devices, but how do you know which are worth your time and what's not worth your money? In our Gear We Love column, Macworld's editors tell you about the products we're personally using--and loving.

Unless you've got just the right desk, there's a good chance you need to elevate your iMac or display to get it to the best ergonomic height--with your eyes about two to three inches below the top edge of the screen.

Your local office-supply store surely has a number of monitor stands to choose from, and online retailers are flush with stands for every budget or office motif. But I've been testing Twelve South's $80 HiRise for iMac for several months, and it's become one of my favorite desktop accessories, both as stand for raising my display to a better height, and as a nifty storage compartment for stuff I don't want littering my desk.

The HiRise for iMac is misleadingly named, as it also works with some Apple Cinema Displays. Specifically, with the exception of Apple's 30-inch Cinema Display, the HiRise works with any iMac, Apple Cinema Display, or Apple Thunderbolt Display with a metal, L-shaped base. I've actually been testing two HiRise units: one with a 27-inch 2010 iMac, and the other with a 23-inch Apple Cinema Display connected to a laptop.

The sturdy, metal HiRise is roughly 8.5 inches wide, 8.5 inches deep, and 3.3 inches tall. The front and rear plates, which look pretty like a miniature version of an older Mac Pro lying on its side, are about an inch wider than the HiRise's body. The HiRise weighs about 4 pounds on its own.

But unlike most display stands, which just provide a platform on which you set your display, the HiRise integrates with your iMac or Apple Display's own base. Inside the HiRise are six machined slots to accommodate an included metal shelf. With the rear plate removed, you install the shelf in the slot that would position your display at the best height. (Your choices: approximately 0.8, 1.1, 1.5, 2, 2.3, or 2.6 inches of elevation.) You then slide your iMac or Apple Display base into the back of the HiRise so that it sits on that shelf, and attach the HiRise's back plate with the included screws. A cutout in the top of the HiRise, along the rear edge, allows the iMac or Apple Display base to exit the stand.

The HiRise and its movable shelf are solidly built, and the assembled stand is quite sturdy. The bottom of the HiRise sports slick, Teflon rails that allow you to easily reposition your display. (I prefer my display to stay put, so I stuck a bit of frame-hanging putty on the bottom.) And, cleverly, Twelve South says that if you're lucky enough to have a 27-inch iMac and an Apple Thunderbolt Display, positioning the HiRise's shelf in the second slot from the bottom will perfectly align the iMac's screen with the Thunderbolt display. (Alas, I don't have a Thunderbolt Display, so I couldn't test this claim.)

 

1  2  Next Page 

Sign up for CIO Asia eNewsletters.