Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

Micro-windmills can recharge cell phones

Lucas Mearian | Jan. 16, 2014
Researchers at the University of Texas at Arlington have built micro-windmills that could be embedded in a sleeve for a cell phone and, with a wave of the hand, used to recharge a device.

Researchers at the University of Texas at Arlington have designed a miniscule windmill with a micro-generator that can be used to recharge mobile devices.

Smitha Rao, a university research associate, and J.-C. Chiao, an electrical engineering professor, designed the micro-windmills. The two have filed for a patent for the devices, which are about 1.8 mm at their widest point.

A single grain of rice could hold about 10 of the tiny devices, and the researchers believe hundreds of them could be embedded in a cell phone sleeve for recharging purposes. Once the sleeve is on the phone, a user would simply wave the device in the air or set the phone in a windy place to get the tiny propeller blades turning, allowing the micro-generators to produce electricity.

The windmills compared to a penny. The wind generators are bout 1.8 mm at their widest point.

The researchers' work attracted the attention of Taiwanese electro-mechanical fabrication company WinMEMSTechnologies, which has the researchers brainstorming on designs.

"The company was quite surprised with the micro-windmill idea when we showed the demo video of working devices," Rao said in a statement. "It was something completely out of the blue for them and their investors."

The idea for the windmills was originally a blend of origami concepts and conventional wafer-scale semiconductor device layouts created so the complex 3-D moveable mechanical structures can be self-assembled from two-dimensional metal pieces using planar multilayer electroplating techniques.

"The micro-windmills work well because the metal alloy is flexible and Smitha's design follows minimalism for functionality," Chiao said in a statement.

Once WinMEMS became interested in the research, it started a relationship with UT-Arlington. Company representatives visited with the UT-Arlington team several times last year to discuss collaboration. An agreement between the school and WinMEMS allows UT-Arlington to hold the intellectual property rights to the micro-windmills while WinMEMS explores commercial opportunities.

WinMEMS Technology demonstrates the micro-windmills.
The micro-windmills include gears, inductors, pop-up switches and grippers. All of those parts are as tiny as a fraction of the diameter of a human hair.

"It's very gratifying to first be noticed by an international company and second to work on something like this where you can see immediately how it might be used," said Rao. "However, I think we've only scratched the surface on how these micro-windmills might be used."

The micro-windmills were tested successfully in September 2013 in Chiao's lab. The windmills operate under strong artificial winds without any fracture in the material because of the durable nickel alloy and the aerodynamic design.

"The problem most MEMS designers have is that materials are too brittle," Rao said. "With the nickel alloy, we don't have that same issue. They're very, very durable."


1  2  Next Page 

Sign up for CIO Asia eNewsletters.