Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

Backing up and restoring musical instruments

Christopher Breen | Sept. 3, 2013
A musician who wishes to remain anonymous finds his instrument suddenly silent.

A musician who wishes to remain anonymous finds his instrument suddenly silent. He writes:

Chris, this is a pretty obscure question, but your blog indicates that you're a keyboard player so I'm hoping you have an answer. My 8-year-old synthesizer lost power during a gig last night and my custom programs were wiped out. Today I looked on the manufacturer's website and see that a firmware update is available (which I hope will cure the problem), but it's in the form of a MIDI file. How can I install this thing? And, is there anything I can do to back up my synth once it's restored?

Now this takes me back. And it does because what you've encountered is a MIDI file full of system exclusive (SysEx) data. In the days before synthesizers had better ways to transfer information (such as a built-in USB port, for example) you had to move raw data between your synth and a computer over a MIDI connection--basically "playing" it from the synth and "recording" it on your Mac. Given your instrument's age (and the nature of that firmware update file) I'm going to assume that this is the method you'll use.

Perhaps I've built this up as something that's difficult to do. It's not, really. You just require the right connections and gear. First, you'll need a USB-to-MIDI interface (or a FireWire-to-MIDI interface). You can find these things for around $35 at music stores and online (see the image above). If the interface doesn't come in the form of a cable (with a USB connector on one end and In and Out MIDI connectors on the other) you'll need a couple of MIDI cables. You then need a software application that can transmit and receive SysEx data. All of today's modern software sequencers and digital audio workstations (DAW) have this feature, though you may have to dig around a bit to find it.

You then make your MIDI hardware connections, configure your synthesizer to accept the firmware update you've downloaded (on my synth I access this command through a Global setting), instruct your synth to keep an ear open for incoming data, and then, on your Mac, "play" the SysEx file so that the data in it transmits to your instrument. Hopefully that instrument shows the update's progress and lets you know when it's been completed successfully.

That takes care of updating your instrument. Go ahead and configure your synth with the instrument settings and patches (instrument sounds) that you use when you perform. Once you've done this, fire up the application you used to transmit the SysEx data for the synth's firmware update. This time, however, you'll ask this application to capture--rather than transmit--the SysEx data coming from your instrument.

 

1  2  Next Page 

Sign up for CIO Asia eNewsletters.